Motor Grader Safety is very important. It ensures that you can stay safe, and that the machine is working properly. If you do not perform daily checks you may experience downtime on the site for a long period of time. In the same way if you miss any simple checks you may be injured. This guide will not include any rules and documentation, but includes practical steps to help you stay safe and get the most money out of your machine.
By following these tips, you will reduce downtime, injuries and long periods of waiting around for the machine. Read on to master Motor Grader Safety practices on every shift.
Table of Contents
Daily Checks Before Switching On
Many people miss these checks and therefore compromise Motor Grader Safety. Performing these checks can help avoid a bad day.
Many people jump in the cab of the machine and start it. However, before starting the machine, walk all around the machine. Ensure that no one is working underneath or in blind spots. Sometimes people may be performing maintenance underneath the machine. If the engine is switched on at this point, someone can be seriously injured.
Look at the ground. If there is any oil, coolant or hydraulic fluid leaking, or even a small patch of dampness, something is wrong. If you notice this in the morning you can plan repairs. However, if you ignore it, your Motor Grader Safety standards drop, and your machine will break down in the middle of a job meaning that you lose a whole day of work. This tip will make your machine safer at no cost to you, just 5 minutes extra.
Blade Check
The blade is an extremely important part of the machine, and if not checked correctly, can present Motor Grader Safety issues. If the edge of the blade is blunt, the operator may increase pressure on the blade, increasing strain on parts of the machine. As a result, parts of the machine will have increased wear and breakages may occur.
Every morning, ensure that there are no cracks in the blade, that it is not excessively worn, and that the bolts are in good condition. If it is excessively worn, change it. Although simple, maintaining Motor Grader Safety prevents unexpected downtime due to this issue being missed.
When parking, ensure that you lower the blade so that it is on the ground. Many people miss this simple step. If the blade is left high, when the pressure in the hydraulics drops, the blade may suddenly fall. If someone is nearby, this could cause a severe accident.
Checking Tyres
Although the tyres may seem fine, ignoring them ruins Motor Grader Safety and is one of the most common causes of unexpected downtime. If a tyre is under-inflated, the machine will pull to one side, causing increased wear. If the work site is very rough, the tyre may burst.
Every morning, ensure you check all of the tyres. Check for damage, foreign objects getting stuck in the treads, and irregular wear. Check the pressures of the tyres using a pressure gauge. Do not just give it a kick to check. Many operators have lost a lot of money by doing this.
This small change will make your machine much safer. Upholding Motor Grader Safety means avoiding tyre bursts, which can take a long amount of time to fix and cost large amounts of money. During this time, the project will be unable to progress.
Hydraulic Fluid Leak
Hydraulic fluid is extremely important in making the machine work. If there is a leak in the hydraulic system, less power will be delivered to the blade. Therefore, the blade may not respond correctly, and the operator may lose control of the machine, destroying Motor Grader Safety protocols.
Every morning, check underneath the machine for new leaks. Check the pipes, connections and cylinders. If there appears to be a wet patch of fluid, work out where it is coming from. If there is a small leak now, there could be an exploded pipe in the future. If this happens on site, a large amount of downtime will occur, and your boss will be very unhappy.
Make sure that the hydraulics are clean. If dirt gets into the hydraulic fluid, it can cause a lot of wear in the pumps and valves. This causes the machine to perform poorly, and eventually fail. Making sure that your machine is clean will make it safer, supporting overall Motor Grader Safety. If this tip is ignored, it will be learnt the hard way.
Operator Fatigue
This is one of the most commonly ignored Motor Grader Safety aspects. If an operator is tired, they are more likely to make mistakes. Tiredness can be caused by long working hours, poor sleeping, or monotonous tasks.
If you begin to get tired during a shift, stop working. Have a drink of water, and stretch your legs. Although this seems simple, many accidents occur due to tired operators not reacting quickly enough. No deadline is worth putting your Motor Grader Safety at risk.
Making sure that you are fully focused is an important safety consideration. If you can not focus, you should not be operating the machine. Although the machine will be operational tomorrow, you need to be there too. If you are not performing at your best, take a break. It is not being weak, it is simply making a sensible decision.
Keep the Cab Tidy
Leaving the cab untidy can create extremely dangerous situations and ruin Motor Grader Safety measures. Tools, bottles of water and papers can get in the way of the operator. When operating a motor grader, it is important to be able to access controls quickly and to have clear vision. A messy cab can prevent this.
At the end of every shift, take 5 minutes to tidy up the cab. Store your tools, secure loose items and wipe the windows. Although this may seem like a small change, it can greatly improve Motor Grader Safety. I have seen operators trip over tools on the ground, and papers obscuring vision in mirrors. This can easily be prevented.
Check that the mirrors are in a good position, and that the windscreen is clear. Having clear vision in the cab is extremely important to operate safely. Without clear vision, you cannot operate safely.
Regular Servicing
As you can see, performing daily checks is very important for Motor Grader Safety. By regularly servicing the machine, it can perform better, last for longer and be operated more safely. If regular servicing is not performed in order to save time, it will cause problems in the long run.
Follow a servicing schedule. Change the oil, filters and fluids. Grease the moving parts, and check the brakes and steering. Although it is not very enjoyable, this is very important for Motor Grader Safety adherence.
Use a log book. Note the checks that have been made, and if any issues were found. If anything seems wrong, report it. Keeping a record will allow problems to be picked up before they become failures. If a problem does occur, the log book will allow you to see exactly what was done, and when, much like following guidelines found in expert leadership strategies.
Why This Matters More Than You Think!
Downtime is very costly. While the machine is not working, money is still being spent on the crew. The project will be delayed and often, if the problem had been picked up early, the repair would be much cheaper.
In addition to keeping people safe, Motor Grader Safety reduces costs. By performing simple checks every morning, you can save money, and by picking up leaks early, planned repairs can be made rather than emergency fixes.
People often do not have major problems with their machines due to performing these small checks every morning. Prioritizing Motor Grader Safety allows machines to last longer, and for sites to run smoothly.
Final Notes
Remember β we do not just want to complete the job. We want to complete it safely, so we can return to our families. If you pay attention to Motor Grader Safety, it will look after you!
To make these changes a habit, try implementing one tip at a time. Soon, you will be performing these Motor Grader Safety measures automatically across your daily shifts.
